CCMWR - E-COAT RECYCLED LATEX PAINT 1000 SERIES, GREEN
- MSDS: CCMWR
- Manufacturer: KELLY MOORE PAINT COMPANY INC
- Product Name: E-COAT RECYCLED LATEX PAINT 1000 SERIES, GREEN
- National Stock Number: 8010-01-380-2366
Product Identification
Product ID:E-COAT RECYCLED LATEX PAINT 1000 SERIES, GREEN
MSDS Date:12/07/1994
FSC:8010
NIIN:01-380-2366
MSDS Number: CCMWR
Responsible Party
SAN CARLOS, CA 94070
US
Emergency Phone: 800-424-9300
Info Phone: 415-592-8337
Preparer: JULIAN SHAFER
Cage: 0Y837
Contractor
Telephone: 650-592-8337
Cage: 0Y837
Ingredients
ETHYLENE GLYCOL (SARA 313)(CERCLA)(VP = 0.1 @ 68F)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 0.0-5.0%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIZZINESS, HEADACHE, NAUSEA,
CONFUSION, UPPER RESP TRACT IRRITATION, SKIN/EYE IRRITATION.
CHRONIC: MAY CAUSE SILICOSIS (NONCANCEROUS LUNG DISEASE WHICH MAY
RESULT IN SUBSTANTIAL IMPAIRMENT OF B REATHING FUNCTION).
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
DR. EYE: FLUSH W/LARGE AMOUNTS WATER 15 MINUTES. GET MED AID. SKIN:
WIPE OFF W/RAG. WASH THOROUGHLY W/SOAP & WATER. INGESTION: CONSULT
HOSPI TAL EMERGENCY ROOM OR POISON CONTROL CENTER IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:NA
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
STEAM PRESSURE BUILD-UP WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:VENTILATE AREA TO PREVENT BUILD-UP OF VAPORS.
SOAK UP SMALL SPILLS W/ABSORBENT. FOR LARGE SPILL, DIKE AREA
W/ABSORBENT MATERIAL & SCOOP UP LIQUIDS.
Handling
Handling and Storage Precautions:STORE UPRIGHT IN SEALED CONTAINER AWAY
FROM HEAT/FLAME.
Other Precautions:REMOVE/WASH CONTAMINATED CLOTHES BEFORE REUSE.
Exposure Controls
Respiratory Protection:PARTICLE MASK (NIOSH/MSHA/TC-21C) TO AVOID SPRAY
MISTS/SANDING DUSTS IF LOCAL VENTILATION ADEQUATE TO KEEP VAPORS
Ventilation:LOCAL EXHAUST OR MECHANICAL EXHAUST SUFFICIENT TO KEEP ALL
VAPORS BELOW PRESCRIBED LIMITS.
Protective Gloves:RECOMMENDED
Eye Protection:GLASSES W/SIDE SHIELDS OR GOGGLES
Supplemental Safety and Health
NK
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Density:
Percent Volatiles by Volume:55-70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS FUMES WHEN
HEATED TO DECOMP AS IN WELDING.
Disposal
Waste Disposal Methods:DISCARD IN LANDFILL IN SEALED METAL CONTAINERS
AWAY FROM HEAT/FLAME IN ACCORDANCE W/ALL LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.